As of March 1st, we will not support this browser anymore. Please use one of the following supported browsers to continue visiting our website
20-45 m³/min / 706-1589 cfm (12-35 bar / 16-612 psi)
What is the impact on fuel consumption of drilling under 35 bar, compared to a gradual pressure buildup? We did the test, and found that drilling under 35 bar results in getting the job done faster, and a lower total fuel consumption.
How deep you can drill per day with Drillair Y35
Additional flow when flushing and during stem refills thanks to Dynamic Flow Boost. That means faster flushing and refilling and a shorter time to finish the drilling job.
Just one truck can carry your compressor and drill rig, that's how compact our high pressure compressors are.
A single truck can carry both the drilling compressor and the rig thanks to the short 4.1 meter frame.
To keep the canopy in good condition for a longer period of time, we use three layers of protection: zincor, primer and powder
Drilling with 30-35 bar high pressure compressor allows you to drill more meters in an hour with a lower overall cost per meter
At Atlas Copco, we know the drill when it comes to compressed air, whatever the flow or pressure. A DrillAir high pressure compressor offers the perfect harmony between pressure and flow and puts you in full control of these parameters, while saving fuel. Read more about the Xc4004, our most advanced controller.
Four reasons to invest in DrillAir:
1. Drilling 500 meters per day is achievable with the DrillAir Y35. Two 4.5” geothermal wells can be finished in a single drilling day. This high pressure compressor makes the perfect drilling solution for all your drilling applications.
2. A single truck can carry both the drilling compressor and the rig thanks to the short, 4.1 meter compressor frame.
3. DrillAir is suitable for sustainable projects, thanks to compliance with Stage V emission standards.
4. DrillAir Y35 consumes less than 2.2 liters of fuel per meter drilled. (depending on various operational parameters)
Thanks to AirXpert 2.0, you can run your DrillAir at various flow and pressure settings. To choose the best DrillAir unit, just consider your core business to enjoy the best possible efficiency, while knowing it will tackle those additional drilling applications too.
DrillAir selection chart
DrillAir Y35; DrillAir V39; DrillAir X28; DrillAir V28; DrillAir H32; DrillAir V21; DrillAir H23.
We made it cleaner and smaller. And it makes you drill faster.
We sent out a new DrillAir Y35 for a field test in Sweden. In this movie we captured the testimonial of the drilling company owner.
Learn how our new smart air controller XC4004 can make your life easier.
Calculate which drillair unit is fit for your needs
Learn more about how Atlas Copco can help you with Stage V compliancy.
General Enquiries
Atlas Copco Power Technique, Swallowdale Lane, Hemel Hempstead, Hertfordshire, HP2 7EA
Monday - Friday 8:30am - 5:00pm