used Gas engines for sale

For sale a motor block of 442 KW Deutz TBG604BV8 gas CHP generator. The crank shaft we can offer also. FCA Free charged on your truck.

Key data: 480

Doosan gas generator in good condition. It has the following specifications: Manufacturer: Doosan Fuel: Gas Manufacture year: 2008 Kva: 600 Mass: 3740 Other specs: 10 cylinder, electric panel, complete.

Power 1250 kw Speed 1500 rpm

Enigines stopped end Overhauled never run after again. Rated power 1,2 MW MAX ALTITUDE OF INSTALLATION : 500 M MAXIMUM AMBIENT TEMP : 25 C RATED FREQUENCY : 50 HZ RATED VOLTAGE : 400 V RATED CURRENT : 1,732 A MASS : 12,025 KG 2. GENERATOR DETAILS: MAKE : LEROY SOMER ALTERNATORS PARTNER LSA : C 50.2VL10B C 6S/4 DATE : 2013/21 FREQUENCY : 50 HZ SPEED : 1500 RPM PROTECTION : IP23/4 POWER FACTOR : 1.0 INSULATION CLASS: H/F A.V.R : R450 EXCITATION : AREP ALTITUDE :

jenbacher engine 320 Diane xt4 with container.

Jenbacher 320 GS Year 2009 743kW the maintenance has ALL been done by Jenbacher Official, HOURS: 106000h I have all the documents. It has strict maintenance directly done by Jenbacher, I have all the documentation from the official Jenbacher house. The genset is complete, ready to be shipped, and assembled. Its exterior measurements are: 12.19 meters long (40 feet), 2.44 meters wide (8 feet) and 2.59 meters high (8 feet 6 inches). You can find us on Whatsapp: +34 611457522 Email: Sales@eurogensets.com

AVAILABLE DIRECT. PLEASE FIND ATTACHED PICTURES AND DETAILS. INFORMATION: ENGINE : JENBACHER MODEL: 420 POWER: 1540 KW FUEL: NATURAL GAS YEAR: 2015 HOURS: 55.000 ALTERNATOR: 10500V,50 HZ, 1500 RPM SCOPE OF DELIVERY ENGINE ALTERNATOR CONTROL PANEL GAS STREET HISTORY: VERY WELL MAINTANED SET. ALL REGULAR SERVICE HAS BEEN DONE. LOCATION: HOLLAND

Key data: 3119 KW

AVAILABLE DIRECT. PLEASE FIND ATTACHED PICTURES AND DETAILS. INFORMATION: ENGINE : JENBACHER MODEL: J620 POWER: 3119 KW FUEL: NATURAL GAS YEAR: 2004 HOURS: 55.000 ALTERNATOR: 6300.50 HZ, 1500 RPM SCOPE OF DELIVERY ENGINE ALTERNATOR CONTROL PANEL GAS STREET

Please Find here with Details of JENBACHER J 612 GS-E 101 Gas Engine Sets Available for Sale. MAKE:JENBACHER TYPE:J 612 GS-E 101 KW:1871 RPM:1500 VOLT:400 HZ:50 WET:9500kg RUNNING HOURS:25265 Kindly advise your interest

One complete engine and some spare parts for Jenbacher J620

Please Find here with Details of JENBACHER JGS612GS-L Gas Engine Sets Available for Sale. MAKE:JENBACHER TYPE:JGS612GS-L KW:1823 VOLT:415 HZ:50 WET:15270kg YEAR:2012 RUNNING HOURS:20517 Kindly advise your interest

Jenbacher 4 Series Engine Heads code 367165 (422964 1216091) Already overhauled Ready to use

Price: VB 200.000 € Three Jenbacher natural gas CHPs are for sale, engines are from 2016 2017 2018. The plant has recently been completely dismantled. All parts are stored and available. CHP with generator, gas control system, Diane xt control, exhaust sound absorber, exhaust gas heat exchanger, transformer systems 3x4Mw for 20kv output voltage, price per engine for all 3 engines 600000 Euro. Great maintenance condition, offer price

CHP with generator Stamford, electrical output 190 kWel., customer property, variant as building integration, without exhaust gas heat exchanger

Liebherr conversion kit V12 G9512, without thermocouple 12x cylinder head; 3.Version, without thermocouple 10152182 12x cylinder head gasket; G9508/G9512 10118055 72x cylinder head screw; M18 x 2 x 246, G9512 9080476 24x cylindrical pin 10470574 12x gasket; Intake manifold, G9508/G9512 10118991 36x six-round screw 10332845 12x gasket; Exhaust pipe, G9508/G9512 9078308 12x valve cover gasket; G9508/G9512 9079885 12x O-ring; Valve cover, G9508/G9512 7381028 24x cylindrical screw; M12 x 80, G9508/G9512 4043173 2x O-ring; 144.5 x 3.00 7380154 24x sealing ring; 14.7 x 22 x 1.5 10011866 4x compensator; Exhaust gas, G9508/9512 10133038 10x clamp; Exhaust gas compensator 10144932 Price on request or VB Sold without warranty and guarantee.

For sale is a used/refurbished gas engine Liebherr G9512. Built: 2013 Operating hours: • since the overhaul 4,000h total 12,000h

Motor from a CHP unit Operating hours approx. 50000 Subject to prior sale - errors possible

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (54 kW) 4 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros

AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (75 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

Container 2,9 x 9,0 meter, gaskooler, gasheaterr, aktiv carbonlfilter, intercooler radiator silencer, ventilation olietanke, exhaurst heat exchanger, gasstring, Gas booster, panelboar and curkitbreaker, • Brand og model; MAN E2876 •Power; 220kW •Heat; Eksos 139kW. Vann 103kW • Year; 2015 • Running hours; ca 30.000 • Hours since last ouverhaul) ca 7000 • Compleat unit Plug and run • Spareparts extra turbocharger.startmotor filters and other parts. I have this unit on stock 50000 euro ready to load

MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MWM G 234 V12 (used) aus Notstrom / from Emergency Power Power / Power: 124 kW Speed / rpm: 1500 1/min Jahr / Year of build 1989

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissi ...

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

MWM TCG 2016 V 8 Exchange Engine / Shortblock It is a refurbished replacement engine. Repaired according to manufacturer guidelines and RAL quality seal. Further information on the scope and design can be found on our homepage buecker-essing.de Out- and installation as well as service around engine and CHP can be optionally provided. Please contact us for a written quote. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.

MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.

MWM TCG 2020 V12 CHP unit used It is a complete, used CHP unit (motor + generator + basic frame). specifications: Gas application: Biogas Mileage: approx. 60,000 Bh Condition: E70 due Year of construction: 2014 Power: 1200 KW The unit was expanded to run in 06/2021. Please contact us for a written offer. We also have other aggregates and replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible.

MWM TCG 2020 V 16 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearing - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve plunger - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and other ...

MWM TCG 2020 V 20 Remanufactured Motor / Short Block It is a refurbished short block. Repaired in accordance with the manufacturer's guidelines and the RAL seal of approval. Circumference: - Crankcase incl. new bearings - Crankshaft (Std-dimension) incl. new bearings - Camshafts incl. new bearings - Wheel drive incl. wheel box cover - Flywheel housing - Oil pump with oil suction pipe -Sump - Valve tappets - Oil pressure valve On request, the scope can be expanded (e.g. pistons, liners, cylinder heads, oil coolers, etc.) Further information on the scope and design can be found on our homepage: buecker-essing Removal and installation as well as service for the engine and CHP unit are optionally possible. Please contact us for a written offer. We also have other remanufactured engines, as well as AT cylinder heads, turbochargers, spare parts and othe ...

Cylinder head for MWM TBG 620, TCG 2020 needed, not overhauled. Can we get over on request. Quantity: On request. Please note: We have various other parts of from different manufacturers and types available.

ETW container unit with 469kW el. Performance as a pure power generator - 40 feet normal container (L x W x H in meters) 12.2 x 2.55 x 2.55 meters with lighting - MWM unit TBG 616V12K - 469kW for landfill gas or biogas / 508kW for natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GLF - Current Bh number only exactly 11,249 due to gas shortage on the first site - Soundproofed version as a system container - Division of container into engine room / electrical room with connecting door - Access door engine room longitudinal and electrical room front side - Gas warning system and smoke detector - Supply and exhaust air system with scenery silencer and supply air filtering - Engine cooling water circuit with circulation pump, hot travel control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling  ...

2 x 2.9MW 60Hz NIIGATA 18V22AG Gas Power Plant for sale NIIGATA says that 18V22AG has a high electric thermal efficiency of 40% or more and the 22AG engine produced 30% higher power than a conventional spark ignition gas engine with the micro-pilot compression ignition system. Produced in 2004, this generating sets had been successfully operated about 32,000 hours and had a good condition as seen in the photos and the plant was dismantled and has been well preserved in our factory and ready for immediate delivery. Main Specifications: - Engine Model: 18V22AG x 2 sets - Maker: NIIGATA - Continuous Output: 2880kWe x 900 rpm - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2004 - Running Hours: abt. 32,000 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set ■ Main Specifications ▣ Gas Engine Maker NIIGATA Model 18V22AG Quantity 2 sets Ye ...

Scania DC 12, complete engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - with exhaust manifold - with thermostat housing - with oil filler nozzles - Turbocharger as needed Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

Scania DC 12, fuselage engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - without exhaust manifold - without thermostat housing - without oil filler nozzles Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.

We offer for fast CHP Scania DC12-16 motors/hull motors in exchange. MIW Motoren-Instandetzunsg-Werk GmbH North-West Ring 8 D-27404 Zeven/Germany E-mail= info at miw-zeven

We are stocked for CHP Fast with Scania Motor DC12/16 fuselage motors. MIW Engine Repair Plant GmbH North-West Ring 8 D-27404 Zeven/Germany e-mail: info at miw-zeven