• 1 x Stretch Safe machine
• 10 x rolls Stretch Safe high performance clear 8 micron machine wrap
• Saving 5%

• Core break system - for use with our 8mu super strength or a 150% elongation film
• Entry-level turntable machine
• Basic electro-mechanical button control panel with 4 parameters
• Uses ‘Standard’ (150 – 200% yield) machine stretch wrap

\r\n
• Built with an easy control panel that allows users to set all the functions of the cycle through the\r\n electromechanical buttons
\r\n
• Panel enables the adjustment of: top and bottom wrap, upward-downward carriage speed, table rotation speed
\r\n
• Constructed to the strictest safety and quality standards, for multiple uses in many different environments\r\n
\r\n
• User friendly machine and ensures pallet stabilisation
\r\n
• Perfect for those with a smaller output
\r\n

• Core break system - for use with our 8mu super strength or a 150% elongation film
• LED display and jog wheel control panel with 9 parameters
• Uses ‘Standard’ (150 – 200% yield) machine stretch wrap

\r\n
• Built with a very easy control panel with clear icons/parameter selector and LED display to make it simple to\r\n programme
\r\n
• Panel enables the adjustment of: upward-downward cycle, only upward-downward cycle, manual cycle, eco cycle\r\n (recorded), top wrap, bottom wrap, reinforce wrap, table rotation speed, upward-downward carriage speed .
\r\n
• Features a spool carriage with mechanical brake, constant stretch of the film independently of the diameter of\r\n the spool. Brake engagement/release device to facilitate hooking the film to the base of the pallet. The\r\n manually adjustable brake acting on the rubber roller to allow to adjust the film tension.
\r\n
• Constructed to the strictest safety and quality standards, for multiple uses in many different environments\r\n
\r\n
• User friendly machine and ensures pallet stabilisation
\r\n
• Perfect for those with a small to medium output
\r\n

• Power pre stretch - for use with with our 12, 15 or 17mu super strength or a 250% elongation film
• Clear & simple control panel with 'easy' and 'advanced' settings
• 3 programmes that can be pre-set in 'advanced' mode
• 1650mm diameter turntable, 2000kg max load
• Uses ‘Super’ (200 – 250% yield) machine stretch

\r\n
• Built with an easy control panel with colour graphic display and ‘easy’ and ‘advanced’ settings
\r\n
• The machine has a 1650 mm diameter 2000 kg base as standard.
\r\n
• Created by combining the easy use of ECOPLAT and the performance of Rotoplat
\r\n
• Ideal for users who need high-level performance yet still need a user friendly solution
\r\n
• Simple and intuitive – jog dial/wheel for program selection
\r\n
• Perfect for heavy, irregular, sharp loads thanks to its constant wrapping ability
\r\n
• Constructed with high-strength steel and anti-corrosion paint
\r\n

• Power pre stretch - for use with our 12, 15 or 17mu super strength or a 250% elongation film
• Turntable height is lower than standard machines meaning the additional ramp takes up less floor space
• Clear & simple control panel with 'easy' and 'advanced” settings
• 1650mm diameter turntable, 1200kg max load
• Uses ‘Super’ (200 – 250% yield) machine stretch

\r\n
• Lower turntable height meaning that when the additional ramp is attached it takes up less floor space
\r\n
• Built with an easy control panel with colour graphic display and ‘easy’ and ‘advanced’ settings
\r\n
• Created by combining the easy use of ECOPLAT and the performance of Rotoplat
\r\n
• The machine has a 1650 mm diameter 1200 kg base as standard
\r\n
• Ideal for users who need high-level performance yet still need a user friendly solution
\r\n
• Simple and intuitive – jog dial/wheel for program selection
\r\n
• Perfect for heavy, irregular, sharp loads thanks to its constant wrapping ability
\r\n
• Constructed with high-strength steel and anti-corrosion paint
\r\n

• Power pre stretch - for use with our 12, 15 or 17mu super strength or a 250% elongation film
• PDS (power differential stretch) film carriage
• 7-inch colour touch screen control panel
• User-friendly graphical interface allows easy use of the multilevel controls
• Uses ‘Super’ (200 – 250% yield) machine stretch

\r\n
• Built with a 7” intuitive, easy colour touchscreen making it simple to set up the correct parameters for\r\n wrapping each load
\r\n
• Ability to control containment force, rotation speed, roping and banding at 9 levels on each load
\r\n
• Input and lock in the wrap setting for up to six completely different load configurations and save them.\r\n Retrieve the required saved configuration over and over with a touch of the panel. Ensures the load is wrapped\r\n consistently and correctly every time, providing ultimate load protection and film savings time after time
\r\n
• S-wrap pattern with quick loading - provides better control of film through the roll carriage and ensures 250%\r\n prestretch on each load. This will protect products from damage while at the same time reducing film usage
\r\n
• Supported with heavy duty casters for large requirements
\r\n
• Photocell automatically detects top of load and utilises infrared sensors that provide better readings on dark\r\n and/or shiny products that can provide false readings with traditional sensors
\r\n
• Constructed with high-strength steel
\r\n

• Power pre stretch - for use with our 12, 15 or 17mu super strength or a 250% elongation film
• Turntable height is lower than standard machines meaning the additional ramp takes up less floor space
• PDS (power differential stretch) film carriage
• 7-inch colour touch screen control panel, user-friendly graphical interface allows easy use of the multilevel controls
• Uses ‘Super’ (200 – 250% yield) machine stretch

\r\n
• Lower turntable height meaning that when the additional ramp is attached it takes up less floor space
\r\n
• Built with a 7” intuitive, easy colour touchscreen making it simple to set up the correct parameters for\r\n wrapping each load
\r\n
• Ability to control containment force, rotation speed, roping and banding at 9 levels on each load
\r\n
• Input and lock in the wrap setting for up to six completely different load configurations and save them.\r\n Retrieve the required saved configuration over and over with a touch of the panel. Ensures the load is wrapped\r\n consistently and correctly every time, providing ultimate load protection and film savings time after time
\r\n
• S-wrap pattern with quick loading - provides better control of film through the roll carriage and ensures 250%\r\n prestretch on each load. This will protect products from damage while at the same time reducing film usage
\r\n
• Supported with heavy duty casters for large requirements
\r\n
• Photocell automatically detects top of load and utilises infrared sensors that provide better readings on dark\r\n and/or shiny products that can provide false readings with traditional sensors
\r\n
• Constructed with high-strength steel
\r\n

• Power pre stretch - for use with our 12, 15 or 17mu super strength or a 250% elongation film
• PVS (performance variable stretch) film carriage
• 7-inch colour touch screen control panel
• User-friendly graphical interface allows easy use of the multilevel controls
• Uses ‘Ultra’ (300% yield) machine stretch

\r\n
• Built with a 7” intuitive, easy colour touchscreen making it simple to set up the correct parameters for\r\n wrapping each load
\r\n
• Multi-level control and six selectable wrap patterns allow you to optimise each of your load types, reduce\r\n damage, improve productivity and reduce film costs
\r\n
• Ability to control containment force, rotation speed, roping and banding at 9 levels on each load
\r\n
• Ensures the load is wrapped consistently and correctly every time, providing ultimate load protection and film\r\n savings time after time
\r\n
• Wrap heavy duty loads as well as awkward or sharp goods
\r\n
• Supported with heavy duty casters for large requirements
\r\n
• Photocell automatically detects top of load and utilises infrared sensors that provide better readings on dark\r\n and/or shiny products that can provide false readings with traditional sensors
\r\n
• Constructed with high-strength steel
\r\n

• Power pre stretch - for use with our 12, 15 or 17mu super strength or a 250% elongation film
• Turntable height is lower than standard machines meaning the additional ramp takes up less floor space
• PVS (performance variable stretch) film carriage
• 7-inch colour touch screen control panel, user-friendly graphical interface allows easy use of the multilevel controls
• Uses ‘Ultra’ (300% yield) machine stretch

\r\n
• Lower turntable height meaning that when the additional ramp is attached it takes up less floor space
\r\n
• Built with a 7” intuitive, easy colour touchscreen making it simple to set up the correct parameters for\r\n wrapping each load
\r\n
• Multi-level control and six selectable wrap patterns allow you to optimise each of your load types, reduce\r\n damage, improve productivity and reduce film costs
\r\n
• Ability to control containment force, rotation speed, roping and banding at 9 levels on each load
\r\n
• Ensures the load is wrapped consistently and correctly every time, providing ultimate load protection and film\r\n savings time after time
\r\n
• Wrap heavy duty loads as well as awkward or sharp goods
\r\n
• Supported with heavy duty casters for large requirements
\r\n
• Photocell automatically detects top of load and utilises infrared sensors that provide better readings on dark\r\n and/or shiny products that can provide false readings with traditional sensors
\r\n
• Constructed with high-strength steel
\r\n

• Core break system - for use with our 8mu super strength or a 150% elongation film
• 3 programmes and 10 adjustable parameters
• Operated via a digital control panel
• FRD carriage – for use with standard machine stretch
• Please note, stretch wrap machines are currently on a 18-20 week lead time
  

\r\n
• Self-propelled robot for stretch wrapping pallets – no operator needed whilst in wrapping cycle
\r\n
• Easy to use control panel with graphic display, dial allows for simple programme selection
\r\n
• 3 programmes to choose from and 10 adjustable parameters
\r\n
• Designed for industrial environments but can operate in challenging working conditions
\r\n
• Vocalised start signal and features lights to warn surroundings during the wrapping cycle
\r\n
• Built with safety in mind – features an emergency stop button
\r\n
• More flexibility to large operations – work round any size pallet, height and width
\r\n

• Power pre stretch - for use with our 12, 15 or 17mu super strength or a 250% elongation film
• 3 programmes and 10 adjustable parameters
• Operated via a digital control panel
• PDS carriage – for use with super machine stretch
• 20mm ground clearance
• Please note, stretch wrap machines are currently on a 12-15 week lead time
  

\r\n
• Self-propelled robot for stretch wrapping pallets – no operator needed whilst in wrapping cycle
\r\n
• Easy to use control panel with graphic display, dial allows for simple programme selection
\r\n
• 3 programmes to choose from and 10 adjustable parameters
\r\n
• Designed for industrial environments but can operate in challenging working conditions
\r\n
• Vocalised start signal and features lights to warn surroundings during the wrapping cycle
\r\n
• Built with safety in mind – features an emergency stop button
\r\n
• More flexibility to large operations – work round any size pallet, height and width
\r\n
• The robot only needs a small space to operate round a pallet, and can be placed away when not in use
\r\n
• 20mm ground clearance
\r\n

• Delivery to a UK address (some UK postcodes may incur an additional delivery cost, please check)
• Installation of the machine by our engineer
• 30 minutes training on how to use the machine
• For installation & training, 12-15 weeks
• PLEASE NOTE: If you do not select this option, you will need to collect the machine

• Standard 1650mm ramp for turntable machines
• Dimensions: 1600 L X 400 W

• Extended 1650mm ramp for turntable machines
• Dimensions: 2000 L X 400 W

• Standard 1650mm ramp for low profile turntable machines
• Dimensions: 1760 L X 600 W

• 270 degree 1650mm ramp for low profile turntable machines
• Dimensions: 1220 L X 590 W

• Standard pit frame for stabilising machine (not Robot Master) underground and creating a flat loading surface
• Please click the ‘i’ button for details on ground preparation

Pitframe installation

\r\n
1. Allow a space of at least 400mm between the back of the Pit frame and any obstruction to allow for the over hang of the control panel.
\r\n
2. Pit frame is made from 80 x 6 steel bar. This is fabricated into the “key hole” shape complete with strengthening bars on the inside to maintain shape whilst casting into concrete.
\r\n
3. To fit frame into concrete proceed as follows:\r\n
   \r\n
   • Dig out concrete approximately 250mm larger than frame.
   \r\n
   • Place frame in position required with top edge of frame at floor level and strengthening bars on the bottom.
   \r\n
   • When satisfied that frame is in correct position, back fill with concrete to floor level outside frame ensuring 83mm deep inside frame. Check all dimensions as drawing and if correct, allow the concrete to set.
   \r\n
   \r\n
\r\n

N.B. It is important that concrete depth inside frame, relative to the floor is 83mm and flat.

Click here to download the pitframe technical drawing.

• Weigh scale pit frame for stabilising machine (not Robot master) underground and creating a flat loading surface
• Please click the ‘i’ button for details on ground preparation

Pitframe installation

\r\n
1. Allow a space of at least 400mm between the back of the Pit frame and any obstruction to allow for the over hang of the control panel.
\r\n
2. Pit frame is made from 80 x 6 steel bar. This is fabricated into the “key hole” shape complete with strengthening bars on the inside to maintain shape whilst casting into concrete.
\r\n
3. To fit frame into concrete proceed as follows:\r\n
   \r\n
   • Dig out concrete approximately 250mm larger than frame.
   \r\n
   • Place frame in position required with top edge of frame at floor level and strengthening bars on the bottom.
   \r\n
   • When satisfied that frame is in correct position, back fill with concrete to floor level outside frame ensuring 83mm deep inside frame. Check all dimensions as drawing and if correct, allow the concrete to set.
   \r\n
   \r\n
\r\n

N.B. It is important that concrete depth inside frame, relative to the floor is 83mm and flat.

Click here to download the pitframe technical drawing.

• For loads up to 2 tonne
• To be placed underneath turntable to give digital weight reading

• Can only be ordered with a stretch wrapping machine
• To be used when wrapping pallets with black or silver products