Rapid Mixer Granulator- RMG


Rapid Mixer Granulator is designed to achieve excellent mixing and consistent granules at lower operating cost along with higher productivity.

Better mixing and closed control of granule size leads to faster tableting speeds with improved quality and least rejections. Dry mixing and Wet Granulating in the same bowl in only few minutes. The entire operation including discharge is fully automatic. Bottom entry main mixing impeller imparts high shear forces to the mass, ensuring intense blends in extremely short process times. Flat bottom profile, minimizes cavitations and dead zones. Flush discharge ensures maximum pass out of process material aiding the process without manual interventions. Suitable end point controls through. Torque/ Load on drive or special probes ease operation and achieve greater cGmp compliance.

Salient Features

  • Homogeneous binder distribution.
  • Short batch time and reduce cleaning time.
  • Maximize CIP effectiveness.
  • Air purge sealing system for main stirrer shaft and granulator shaft.
  • All internal contact parts are polished to the mirror finish.
  • PLC based operating panel for precise control of process & automation.
  • A high-speed granulator is inserted horizontally through wall of bowl to assist blending of powder and to break the product to the granules of required size.
  • The seal housing and drive shaft may be flushed with cleaning water, which is then drained away from the machine through built in drain tubes.
  • Granulator motors is provided with a removable stainless steel shroud which covers the motor and simplify cleaning.
  • All moving parts of the machine are totally enclosed to eliminate accident.
  • The machine cannot be started unless and until the mixer cover is properly closed.
  • All contact parts are made out of SS304. SS316 provided on demand on extra cost.
  • Flush wall type discharge valve eliminates pockets at the port of discharge valve.



  • Dome shaped processing bowl which directs loose particles into whirling motion with the help of impeller.
  • Impeller consists of 2 full and 2 half solid mixing blades.
  • Inclination of the mixing blades accelerates rising and tumbling motion of the product in the bowl.
  • Specially designed chopper blades driven at high speed gives fast and even granulation, throughout the whole mass in the product bowl.
  • For easy accessibility in cleaning the side discharge assembly is provided with hinges.




rapid mixer granulator